Submissions

Login or Register to make a submission.

Author Guidelines

AUTHOR GUIDELINES

Authors are strongly advised to read these guidelines carefully before submitting a manuscript to JERPI. Manuscripts that do not comply with these guidelines may be returned to the authors before peer review.

1.Journal Policy at a Glance

  a. Language: English only

  b. Publication Fee: Free. No submission fee and no article processing charge

  c. Minimum References: At least 30 references

  d. Citation Style: APA 7th Edition

  e. Submission System: Online Journal System (OJS)

  f. Review Model: Double masked peer review

  g. License: Creative Commons Attribution 4.0 International License (CC BY 4.0)

2. Aims and Scope

        JERPI publishes original scholarly works in the field of education and pedagogical innovation. The journal welcomes manuscripts that contribute to theory, research, and practice in areas including, but not limited to:

  a. Teaching and learning strategies

  b. Instructional design and learning models

  c. Curriculum development and implementation

  d. Assessment, evaluation, and educational measurement

  e.  Educational technology, digital learning, and learning media

  f. Teacher professional development

  g. Inclusive education and education policy

  h. Development and validation of instruments and learning resources

  i. Classroom-based and community-based educational interventions

Submitted manuscripts must demonstrate clear relevance to education and offer a meaningful contribution through novelty, improvement, or strong contextual insight.

3. Types of Manuscripts

       JERPI accepts the following types of manuscripts:

a. Research Articles (Empirical studies using quantitative, qualitative, or mixed methods approaches)

b. Review Articles (Systematic reviews, meta-analyses, or scoping reviews that provide a critical synthesis of relevant literature)

c. Practice-Based Reports (Reports on data-informed educational innovations, interventions, or field-based practices)

    Recommended Length

a. Research Articles: 4,000 to 8,000 words, including references

b. Review Articles: 5,000 to 9,000 words, including references

c. Practice-Based Reports: 3,000 to 6,000 words, including references

4.General Submission Requirements

Manuscripts submitted to JERPI must meet the following requirements:

a. The manuscript is original and has not been published previously

b. The manuscript is not under consideration by another journal

c. The manuscript is relevant to the aims and scope of JERPI

d. The manuscript is written in clear academic English

e. The manuscript follows the JERPI template and formatting requirements

f. All authors have approved the final version of the manuscript and agree to its submission.

5. Publication Ethics and Malpractice Statement

JERPI adheres to standard publication ethics. Authors must ensure that:

a. All data are accurate and honestly reported

b. No fabricated, falsified, or manipulated data are included

c. All sources are properly cited and referenced

d. Authorship reflects actual scholarly contribution

e. No duplicate or redundant publication occurs

f. Any conflict of interest is clearly disclosed

Any form of unethical publication practice is unacceptable.

6. Open Access and APC Policy

JERPI is an open-access journal. All articles are freely available to readers immediately upon publication.

a. No submission fee

b. No article processing charge

c. No publication fee

All published articles are licensed under the Creative Commons Attribution 4.0 International License (CC BY 4.0).

7.Peer Review and Publication Process

JERPI applies a double-blind peer-review process to ensure fairness, objectivity, and academic quality. The identities of authors and reviewers are concealed during the review process. The publication process includes the following stages:

a. Manuscript Submission
Authors submit the manuscript through the OJS platform.

b. Initial Editorial Screening
The editorial team evaluates the manuscript for scope, structure, formatting, completeness, and compliance with journal policies.

c. Similarity Check
The manuscript is screened for similarity and potential plagiarism.

d. Reviewer Assignment
Eligible manuscripts are assigned to at least two reviewers with relevant expertise.

e. Peer Review
Reviewers assess the manuscript based on originality, relevance, methodology, clarity, analysis, and contribution to the field.

f. Editorial Decision
The editor issues one of the following decisions: Accept, Minor Revision, Major Revision, or Reject.

g. Revision Stage
Authors submit a revised manuscript along with a point-by-point response to reviewers’ comments.

h. Final Decision
The final decision is made based on the quality of the revised manuscript.

i. Copyediting and Proofreading
Accepted manuscripts proceed to copyediting, layout editing, and proof approval.

j. Publication
The final article is published online in accordance with the journal's schedule.

The estimated total processing time is approximately 5 to 10 weeks, depending on reviewer availability, the extent of revision required, and editorial workload.

8. Plagiarism and Similarity Policy

All manuscripts submitted to JERPI are subject to similarity screening.

a. The recommended maximum similarity index is 20% overall similarity

b. Manuscripts with excessive overlap may be returned for revision or rejected

c. Plagiarism, including unattributed copying and improper paraphrasing, is unacceptable

Authors are fully responsible for the originality of their work.

9. Policy on Generative AI Tools

Generative AI tools may be used only for limited support, such as grammar checking or improving readability. Their use must be disclosed clearly in the manuscript when applicable.

a. AI tools cannot be listed as authors

b. Authors remain fully responsible for the accuracy, originality, interpretation, and final content of the manuscript

If AI tools are used

Please include the following statement:

“The authors used [tool name] for [specific purpose]. The authors reviewed and edited the output and take full responsibility for the final content.”

If AI tools are not used

Authors may include the following statement:

“No generative AI tools were used in the preparation of this manuscript.”

10.Submission Files

All manuscripts must be submitted through the JERPI OJS platform.

Required Files

a. Main Manuscript

  1. submitted in DOC or DOCX format
  2. anonymized for double blind review
  3. must not contain author names, affiliations, acknowledgements, or identifying information
  4. file properties and metadata must also be anonymized

b. Title Page

Submitted as a separate file containing:

  1. full names of all authors without academic titles
  2. institutional affiliations and country
  3. corresponding author email
  4. ORCID, if available

Optional Files

  1. Cover Letter
  2. Supplementary Materials
  3. Data or Code Availability Information
  4. Appendices, instruments, or additional tables and figures

 11. Manuscript Template and Formatting Requirements

Authors must prepare the manuscript using the JERPI template. Unless otherwise stated in the template, the standard formatting requirements are as follows:

a. paper size: A4

b. layout: single column

c. margins: 2.5 cm on all sides

d. font: Times New Roman

e. main text size: 11 pt

f. line spacing: single

g. paragraph alignment: justified

h. Headings: Use a clear, consistent hierarchy with no more than 3 levels.

12. Manuscript Structure

For empirical studies, manuscripts should generally follow the IMRaD structure.

a. Title

The title should be concise, informative, and directly reflect the content of the manuscript. A title length of 13 to 20 words is recommended. Avoid unnecessary abbreviations.

b. Abstract

The abstract should be written in one paragraph and contain 150 to 250 words. It should briefly present the background, objective, method, main findings, and conclusion. Do not include citations, tables, or figures.

c. Keywords

Provide 3 to 5 keywords separated by semicolons. Use terms that improve discoverability and accurately represent the content of the manuscript.

d. Introduction

The introduction should include:

  1. the background and importance of the topic
  2. a brief review of relevant studies
  3. the research gap and novelty
  4. the objective of the study, research questions, or hypotheses

e. Method

The method section should provide sufficient detail to allow evaluation and possible replication. It should include:

  1. research design and approach
  2. participants, sample, and setting
  3. instruments or materials
  4. validity, reliability, or trustworthiness where relevant
  5. procedures and data collection
  6. data analysis techniques
  7. ethical considerations where applicable

f. Results and Discussion

Results should be presented clearly and logically. Tables and figures may be used where necessary. The discussion should interpret the findings, relate them to previous studies, explain theoretical or practical implications, and acknowledge limitations and future research directions.

g. Conclusion

The conclusion should be brief, clear, and written in paragraph form. It must answer the research objective or questions. Do not introduce new data or new citations in this section.

h. Acknowledgements

This section is optional. It may include funding information, institutional support, or non-author contributions.

i. Required Statements

Where applicable, authors are encouraged to include the following statements before the References section:

  1. Conflict of Interest
  2. Funding
  3. Ethical Approval and Informed Consent
  4. Data Availability

j. References

All references must follow APA 7th Edition and comply with the journal’s reference requirements.

13. Tables, Figures, and Equations

Tables

a. number tables sequentially as Table 1, Table 2, and so on

b. Provide a clear title above each table

c. avoid vertical lines

d. ensure the contents are editable and not inserted as images

Figures

a. number figures sequentially as Figure 1, Figure 2, and so on

b. provide captions below each figure

c. ensure labels, legends, and text are readable

d. use a minimum resolution of 300 dpi

e. provide proper citation and permission for adapted materials where required

Equations

a. use the Word equation editor

b. do not insert equations as images

c. number equations if they are referred to in the text

14. Citation Style and Reference Requirements

JERPI uses APA 7th Edition for both in-text citations and reference lists.

Authors must follow these requirements:

a. each manuscript must include at least 30 references

b. references must be relevant, credible, and traceable

c. recent and primary sources are strongly preferred, especially journal articles published within the last 10 years

d. foundational works may be cited where necessary

e. DOI must be provided as a URL whenever available

Basic APA Style Examples

a. one author: (Author, Year)

b. two authors: (Author & Author, Year)

c. three or more authors: (Author et al., Year)

d. direct quotation: (Author, Year, p. X)

The use of reference management software such as Mendeley, Zotero, or EndNote is strongly recommended.

15. Research Ethics for Human Participants

For studies involving human participants, including students, teachers, interviewees, or classroom-based subjects, authors must:

a. state ethical approval from an institution or ethics committee, or explain clearly if formal approval was not required

b. confirm that informed consent was obtained where applicable

c. ensure confidentiality, anonymity, and proper data protection

16. Data Availability Statement

JERPI encourages transparency and responsible data sharing. Authors must include a Data Availability Statement in the manuscript.

Examples:

a. “Data are available on request from the corresponding author.”

b. “Data are available in [repository name] at [link].”

c. “Data are not publicly available due to [reason].”

17. Post Acceptance Process

After a manuscript is accepted, it may undergo final editorial and technical processing. Authors may be asked to:

a. revise formatting to ensure full compliance with the journal template

b. review copyediting and layout editing results

c. check and approve proofs carefully and promptly before publication

Failure to respond during the proof stage may delay publication.

Submission Preparation Checklist

Before submitting a manuscript to JERPI, authors must confirm that the submission meets the following requirements:

1. Scope Compliance
The manuscript fits the aims and scope of JERPI.

2. Originality and Exclusivity

The manuscript is original, has not been published previously, and is not under consideration for publication elsewhere.

3. Language Requirement
The manuscript is written in clear and academic English.

4. Template and File Format

The manuscript has been prepared using the JERPI template and is submitted in DOC or DOCX format.

5. Title, Abstract, and Keywords
The manuscript includes a clear title, an abstract of 150-250 words, and 3-5 keywords.

6. Manuscript Structure
The manuscript follows the required structure and format of JERPI. For empirical studies, the manuscript generally follows the IMRaD structure.

7. Minimum References
The manuscript includes at least 30 references.

8. Citation Style

In-text citations and references follow APA 7th Edition, and DOI URLs are provided where available.

9. Tables and Figures

All tables and figures are numbered, captioned, cited in the text, and presented in readable and editable form where applicable.

10. Anonymized Manuscript

The main manuscript has been anonymized for double blind peer review. Author names, affiliations, acknowledgements, and identifying information have been removed from both the manuscript and file metadata.

11. Title Page

A separate title page has been prepared, containing full author names, affiliations, country, the corresponding author's email, and ORCID, if available.

12. Publication Ethics

The manuscript complies with publication ethics, including originality, accurate reporting of data, proper citation, valid authorship, and absence of redundant publication.

13. Similarity Check

The manuscript has been checked for similarity, and the overall similarity level does not exceed the journal’s recommended threshold of 20%.

14. Research Ethics for Human Participants

If the study involves human participants, ethical approval, informed consent, confidentiality, and data protection have been addressed appropriately.

15. Conflict of Interest and Funding Disclosure

Any conflict of interest and funding information have been disclosed in the manuscript, where applicable.

16. Generative AI Disclosure
Any use of generative AI tools has been disclosed appropriately in the manuscript. If no AI tools were used, the authors may state this clearly.

17. Data Availability Statement
A data availability statement has been included in the manuscript.

18. Author Approval

All authors have read and approved the final version of the manuscript and agree to its submission to JERPI.

19. Proofreading and Consistency

The manuscript has been proofread for language quality, formatting consistency, and completeness.

20. Supplementary Files, If Applicable

Any supplementary files, such as cover letter, instruments, appendices, or data and code information, have been prepared and uploaded where necessary.

Privacy Statement

Privacy Statement

     The names, email addresses, affiliations, and any other personal information entered in this journal site (JERPI) will be used exclusively for the purposes of this journal, including manuscript submission, editorial processing, peer review, publication, indexing, and post-publication communication.

     This information will not be used for any other purpose or made available to any other party, except where necessary to support the journal’s publishing workflow, such as communication among editors, reviewers, and authors, or where required by law.

     JERPI takes reasonable steps to protect personal data and to maintain the confidentiality of manuscripts, peer review records, and editorial communications. Access to personal information is restricted to authorized journal personnel who require such access to carry out their editorial and publishing responsibilities.

     By registering with and using this journal site, users consent to the collection and use of their personal information for the purposes stated above.

     Users may request access to, correction of, or deletion of their personal data by contacting the editorial office at: jerpi@bin-foundation.org